LG VH92 DSWG Series Owner's Manual page 5

IMPORTANT SAFETY INSTRUCTIONS
CAUTION
• Do not use this cleaner on anything other than
rated voltage.
It may cause fire and unrepairable product damage.
• If the product is not in use for a long period of time, pull
out the power plug.
• Static Electricity may be generated at main body during
the cleaning.
Cleaner may malfunction due to electrostatic energy, so pull
out the power cord and put it back in again.
• Big objects such as socks, stocking, tissues, etc., may
block the inlet during the cleaning, so please remove
them before starting the cleaning.
This appliance must be used to remove dust only.
• Do not place anything else on the sterilizer station other
than this appliance.
Close proximity of magnets or other active electromechanical
appliances to the sterilizer station can cause malfunction.
• Do not stop on one spot or use it on the same spot
repeatedly for a long time.
The surface may be damaged by the friction and vibration.
• Do not touch the bottom surface with hand or foot while
the appliance is in operation.
• Do not operate the appliance without the dust bin and its
covers in place. Always ensure the dust bin is cleaned
when it reaches its limit or beforehand.
If it is used continuously while dust bin is full, it will cause
malfunction and overheating.
• To avoid the risk of fire or electric shock, always grip
it from the plug when removing. And never pull on the
power cord when removing it from the wall socket.
• If a foreign object is attached to the bottom surface of
dust bin, remove it before using the product.
It could compromise the suction motor and cause malfunction
and damage.
• Make sure to secure the bottom plate during the cleaning
of bedding items. Do not use the appliance on a solid
surface or flooring. Doing so could cause damage to both
the surface and to the appliance.
• Do not store the appliance or the UV station in an outdoor
environment.
• Never use the product for removing toxic gases.
The product may fail, and toxic gases are not removed.
• Use or place the unit on a level area and do not apply
force to the unit.
Doing so can cause fire or product failure.
• Dispose the product right way.
There is a risk of fire and explosion.
5