4-4.Sas Controller Configurations; 4-5.Install The Driver - NEC N8103-104A User Manual

4-4.SAS Controller Configurations

This product's configuration is optimized at factory shipment. Normally, reconfiguration is not
necessary, however, if necessary, you can reconfigure this product by using its utility.
Refer to "5.SAS BIOS - SAS Configuration Utility - " for the details of the SAS Configuration Utility.
Tips

4-5.Install the Driver

To use this product, the appropriate SAS driver for your operating system must be installed. For
detailed information, refer to the "N8103-104A SAS Controller Software User's Guide" which is
included in "N8103-104A SAS Controller Windows Driver CD" as "\Manual\ENG\Setup.pdf".
Tips
After installing this product, the system cannot be booted from USB CD-ROM
drive. Please change the setting of SAS BIOS referring to "5-1. About SAS
Configuration Utility".
Install the OS to internal Hard disk according to the "User's Guide" provided with
the server.
As for Linux, refer to the following URL.
- NEC Express5800 Website
http://www.nec.co.jp/express/linux/index.html
- 33 -