Setting And Adjusting Surround Mode; Selecting The Surround Mode - JVC NX-DD30 Instructions Manual

Setting and Adjusting Surround Mode

About Surround Mode
■Multi-channels Surround Mode
When a multi-chan-
nel signal is input
with "AUTO SUR-
ROUND" setting,
this unit automati-
cally determines the
correct format and turns the surround mode "ON".
When a 2ch signal is input, the unit automatically
turns off the surround mode.

Selecting the Surround Mode

1
Press repeatedly to select
the surround mode.
Each time you press
changes as follows.
Normally this mode should be
turned on.
Select this mode when watching
movies or using sound sources
recorded with multi-sounds.
This mode produces broader sound
compared with the multi-channel
mode. Select this mode when using
the sound source recorded with 2ch
such as sound source or CD.
This mode produces even broader
sound.
Turns off the surround effect.
NOTE
• When the surround mode is "ON", and the signal
has been surround-processed, the display window
shows "SURROUND".
• During recording, the surround mode is tempo-
rarily deselected.
• When headphones are connected, the selected
headphones mode is displayed (
Introduction
, the display
page 40).
38