Editing Tracks; Dividing A Track Into Two Tracks (Divide) - JVC NX-DD30 Instructions Manual

Editing Tracks

Dividing a Track into Two
Tracks (DIVIDE)
Example: Dividing a tune into tune A and tune B
■While the track you want to divide is being
played back
1
Press repeatedly to select
"DIVIDE?".
2
Press .
• You can also select the track number with
, or the number buttons. Refer to
"Using the number buttons" (
3
Press to specify the dividing
point.
• This product repeatedly plays back the 4
seconds of sound immediately following the
dividing point.
"POSI." stands for "POSITION".
• When the dividing point does not have to be
adjusted, proceed to step 5.
• When you want to adjust the dividing point,
proceed to step 4.
57
Editing MDs
4
Press
• You can adjust the dividing point within the
5
Press
6
Track
Press
number
NOTE
• During editing, you can return to the previous step
by pressing
by pressing
• You cannot divide a track in an MD containing
254 or more tracks. When you press
3, "DISC FULL" appears.
• When you divide a track that has a title, the title is
added to both divided tracks.
page 18).
or .
range of -128 to +128 position (approxi-
mately -8 to +8 seconds in SP mode).
.
.
. You can quit the editing operation
.
Introduction
in step