Quitting Recording - JVC NX-DD30 Instructions Manual

1
Select a sound source.
Sound source
Select the radio station whose broad-
Radio
cast you want to record (
broadcast
20).
Sound from
Press
other equip-
or LINE-DIGITAL 1/2, and prepare
ment (LINE/
playback on the other equipment
LINE-DIGITAL
1/2)
( page 50).
2
Insert an MD for recording.
• Confirm the MDLP, "LP: " indicator and
group recording settings. (
and 52)
• Close the write protect knob on the MD
( page 72).
3
Hold down
REC
approximately 4 seconds to dis-
play the track mark options.
4
While the track mark options are
displayed, press
main unit to select a track mark
option.
• Each time you press
changes as follows.
: Each time you press
recording, a track mark is set
(initial setting).
: Track marks are automatically set
in 5-minute intervals.
: When no sound is produced for 3
or more seconds, a track mark is
automatically set. You can also
insert a track mark by pressing
.
5
REC
Press on the main unit.
Example: Display while FM radio broadcast is
recorded
Operation
page
repeatedly to select LINE
pages 51
on the main unit for
on the
, the display
during
For the locations of remote control
buttons, refer to page 51.
• When recording the sound from other equip-
ment, wait until "LINE → MD" appears, and
then start playback of the connected equip-
ment. Recording automatically starts when
sound is input to the main unit.
You can also start recording by pressing
.
With this method, even when sound from
the connected equipment pauses for 30 or
more seconds, the main unit does not auto-
matically quit recording.

Quitting Recording

Press .
Changing the display in the display
window during recording
Press .
• Each time you press
changes as follows.
Clock display
Introduction
, the display
54