Daily Timer (Alarm Timer) - JVC NX-DD30 Instructions Manual

(Continued)
Using the Timers
Canceling the recording timer
Press once to display "REC TIMER" and
then press . In the display window,
"REC" will have disappeared. When REC Timer is
finished, these displays will also disappear.
Activating the recording timer again
The settings for REC Timer are recorded in the
memory. Press once to display "REC
TIMER" and then press
will be displayed one by one, after which
"REC" will be displayed.
NOTE
• When the power plug is disconnected or the power
is interrupted, the recording timer settings may be
lost. If the settings are lost, set the clock and
recording timer again.
67
Convenient Functions
and
. The settings details
and

DAILY Timer (Alarm Timer)

This operates at the same time every day, like an
alarm clock.
1
Prepare the sound source you
want to play back.
Disc Make sure that a disc is loaded.
( page 22)
MD
Insert an MD. (
Radio Preset the radio station whose broadcast
you want to listen to. (
Other Follow the operation manual for the
equipment equipment.
2
Press four times to go to the
start time setting display for DAILY
TIMER.
3
Press ,
starting time and ending time.
• You can use the number buttons to set the
playback time. Refer to "Using the number
buttons" ( page 18).
• For setting the clock, refer to "Setting the
Clock" ( page 18).
Entering the "hour" →
"minute" →
Introduction
page 45)
page 20)
or to set the
→ Entering the