Group Playback Of An Md; Program Playback Of An Md - JVC NX-DD30 Instructions Manual

(Continued)
Listening to MDs

Group Playback of an MD

You can play back just the tracks from a group
which you want to listen to.
■While an MD is stopped
1
Press repeatedly to select
"GROUP".
2
Press .
• Group 1 playback starts.
• If there is no group, "GR" disappears and
normal playback starts.
3
Press or
group.
• When playback of all tracks in the selected
group finishes, playback automatically
stops.
Canceling group playback
While playback is stopped, press
repeatedly to select an item
other than "GROUP".
NOTE
• Ejecting the MD or turning off the main unit also
cancels group playback.

Program Playback of an MD

This function allows you to program up to 32
tracks.
■While an MD is stopped
1
Set the remote control mode
selector to AUDIO.
2
Press to select "PROGRAM".
47
3
to select a
4
While playback is stopped, press
or
While playback is stopped, press
other than "PROGRAM".
While playback is stopped, hold down
Press the number buttons (
or ) to select the track num-
bers.
• Refer to "Using the number buttons"
( page 18).
NOTE
• When you want to erase the program, press
while playback is stopped. Programmed tracks are
erased one by one from the last track. Holding
down erases all programmed tracks.
• When you try to program the 33rd track, "MEM-
ORY FULL" appears in the display window to
indicate that 33 or more tracks cannot be pro-
grammed.
• When total time for program playback reaches 2
hours 31 minutes for an MD, "--:--" appears.
Press .
Confirming the programmed track
order
repeatedly.
• You can add a track as the last track in the
program, or erase the last track.
( step 3)
Canceling the program playback
repeatedly to display an item
• This operation does not erase the program.
Erasing all the programmed tracks
.
NOTE
• Ejecting the MD or turning off the main unit also
erases all the programmed tracks. This operation
also cancels program playback.
- ,