Mitsubishi Electric 800 Series Instruction Manual page 56

5.1.2
Basic operation of the operation panel (factory setting)
Operation mode switchover/Frequency setting
External operation mode
Parameter setting mode (At power-ON)
Parameter setting mode
∗5
Group parameter setting
Function mode
Long press
 For the details of operation modes, refer to the FR-F800 Instruction Manual (Detailed).

Monitored items can be changed. (Refer to the FR-F800 Instruction Manual (Detailed).)

For the details, refer to the FR-F800 Instruction Manual (Detailed).

For the details of faults history, refer to the FR-F800 Instruction Manual (Detailed).

The USB memory mode will appear if a USB memory device is connected. Refer to the FR-F800 Instruction Manual (Detailed) for the details of the USB memory mode.
∗1( At power-ON)
PU operation mode
Value change
Output current monitor
∗2
Value change
Parameter clear All parameter clear
Automatic parameter setting
(Example)
Blinking
Faults history 1
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
∗1
Frequency setting has been
written and completed!!
∗2
Display the present
setting
Parameter write is completed!!
Faults history clear
IPM parameter initialization
∗3
Trace function PID gain tuning
(Example)
Blinking
∗4 ∗4
Faults history 2
is displayed.
Operation panel (FR-DU08)
PU Jog operation mode ∗1
Blink
(Example)
∗2
Output voltage monitor
Blink
(Example)
Parameter copy
Initial value change list
∗3
(Example)
Blinking
∗4
Faults history 8
BASIC OPERATION
17