Beko BEVPI 090 User Manual page 8

1 Safety Precautions
If connecting power to fixed
•
wiring, an all-pole disconnection
device which has at least 3mm
clearances in all poles, and
have a leakage current that
may exceed 10mA, the residual
current device (RCD) having
a rated residual operating
current not exceeding 30mA,
and disconnection must be
incorporated in the fixed wiring
in accordance with the wiring
rules.
Take note of fuse
specifications
The air conditioner's circuit board
(PCB) is designed with a fuse to
provide overcurrent protection. The
specifications of the fuse are printed
on the circuit board, such as:
T3.15AL/250VAC, T5AL/250VAC,
T3.15A/250VAC,
T20A/250VAC, T30A/250VAC, etc.
Note: For the units using R32
C
or R290 refrigerant, only the
blast-proof ceramic fuse can
be used.
8 / 184 EN
T5A/250VAC,
Warnings for product
installation
1. Installation
performed by an authorized
dealer or specialist. Defective
installation can cause water
leakage, electrical shock, or
fire.
2. Installation must be performed
according to the installation
instructions.
installation can cause water
leakage, electrical shock, or
fire.
3. Contact an authorized service
technician for repair or
maintenance of this unit. This
appliance shall be installed
in accordance with national
wiring regulations.
4. Only use the included
accessories, parts, and
specified parts for installation.
Using non-standard parts
can cause water leakage,
electrical shock, fire, and can
cause the unit to fail.
Split Type Air Conditioner / User Manual
must be
Improper