Table of Contents
Advertisement
Using the Oven
Clock Setting
After connecting the oven to the power supply, the Clock indicator and
flashing on the display.
1. Press
until the Clock Indicator (
2. Within 5 seconds, press
• Press once to increase or decrease by 1, and hold for 3 seconds for quick- adjust.
3. Wait for 5 seconds to finish the clock setting. The Clock Indicator turns off, and the
clock is set.
■
Note:
• If you change the clock setting after setting the alarm, duration, and end time, the
alarm does not change, but the duration and end time are reset.
Function Setting
1. Rotate Function Setting knob to choose the cooking function as required.
2. Rotate Temperature Setting knob to choose the cooking temperature as required.
• For defrost, skip this step.
3. Press
until the Duration Indicator (
4. Within 5 seconds, press
• Press once to increase or decrease by 1, and hold for 3 seconds for quick- adjust.
5. Wait for 5 seconds to finish the duration setting. The Duration Indicator turns on, and
counting down starts.
When counting down stops, power will turn off, Duration Indicator will flash,
will be displayed, beep will sound twice every 5 seconds. Press any button to stop
beeping, and press
6. Turn the Function Setting knob to the
■
Note:
• If steps 3 - 5 are ignored, cooking continues until the Function Setting knob is turned
to the
position to cancel the function.
• The oven lamp will be on for all the cooking functions.
• Turn the Function Setting knob to the
• While cooking is in progress, you can change the cooking function or adjust the
temperature by turning the Function Setting knob or Temperature Setting knob.
• While cooking is in progress, you can adjust the cooking duration time by pressing
twice, then press
be confirmed.
Operations
) flashes.
or
to adjust the time. (The range is 24 hrs.)
) flashes.
or
, to adjust the time. (Adjust range is "0:01~ 23:59".)
to display the current time.
position during the cooking to cancel the cooking.
or
. If any key is not pressed within 5 seconds, the change will
position.
will be
13
Advertisement
Table of Contents
