Table of Contents
Advertisement
Safety Precautions
During use the appliance becomes
hot. Care should be taken to avoid
touching heating elements inside
the oven.
Accessible parts may become hot
during use. Children should be
kept away.
Make sure the Wire Shelf and Deep
Baking Tray are fully inserted and
not in contact with the glass door,
it may cause shattering of glass
door.
If the hinges are not locked, they
can snap shut with great force.
Ensure that the locking levers
are always fully closed or, when
detaching the appliance door, fully
open.
Installation and servicing must be
carried out by competent persons
in accordance with the regulation
in force.
Never obstruct the openings and
slits provided for ventilation and
heat release.
Before the oven is operated, all
the protective film applied must
be removed (apart from the Name
Plate).
Take care that no objects are stuck
in the door of the oven.
Please use caution when
unpacking, installing or moving
this product, as some exposed
edges may be sharp to the touch
and may cause injury if not
handled with care.
Make sure to follow these instructions
WARNING
The hinges on the appliance door
move when opening and closing
the door, and you may be trapped.
Keep your hands away from the
hinges.
Do not connect the power voltage
other than 220 - 240 V
cause fire or electric shock.
The oven must not be installed
behind a decorative door in order
to avoid overheating.
Do not disassemble the oven for
reconstruction.
Do not discard the packaging
or any part of it, or leave it
unattended. It can constitute a
suffocation hazard for children,
especially the plastic bags.
CAUTION
Oven become very hot during use.
Suitable heat-proof gloves should
be worn when handling.
All cooking operations must take
place with the door closed.
When the oven is first switched
on, it may emit an unpleasant
smell. This is due to the bonding
agent used for insulating panels
within the oven. Heat up the new
empty oven with the conventional
cooking function, 250 °C for
15 - 20 minutes in order to remove
any manufacturing residues. It is
normal that there will be a slight
smoke and odours.
, may
5
Advertisement
Table of Contents
