HP Vectra VL6 7 Installation Manual page 28

c905.bk : ch_9.fb4 Page 1 Thursday, October 22, 1998 9:51 AM
Windows for Workgroups
ver. 3.11
Connecting to a Windows NT Server 4.0
Requirements
• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
• 3COM Etherlink 3C905 Ethernet card and drivers disk ver. 4.3.
• DOS ODI Name (Vectra VL7 alone): EL90X.DOS Size: 46KB
Date: 12/20/96
• NDIS Driver Name: El90X.386 Size: 72KB Date: 1/29/98
• Microsoft Windows NT Server 4.0 machine that supports Net BEUI,
NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
• Network Driver Optimization
• Full Duplex
• Boot PROM
• Media Type
Vectra VL8
I/O Base Address FCC0h (PCI)
Interrupt Request 9 (PCI)
Level
Procedure
1 With the HP Vectra turned off, install the 3COM Etherlink III 3C905
adapter card into a PCI slot.
Connecting to a Windows NT Server 4.0
Windows for Workgroups ver. 3.11
Normal
Auto Select (N-WAY)
Disabled
Auto Select (N-WAY)
Vectra VL7
FCC0h (PCI)
9 (PCI)