HP Vectra VL6 7 Installation Manual page 35

c905.bk : ch_11.fb4 Page 2 Thursday, October 22, 1998 9:51 AM
Connecting to a Windows NT Server 4.0
Windows NT Workstation Ver. 3.51
2 Connect network cable media to the 3COM 3C905 card.
3 Insert a DOS bootable diskette and power on the machine.
4 After booting, insert the 3COM software "3C905 Ethernet drivers disk ver
2.1.", execute "A:\3C90XCFG.EXE."
5 Select "CONFIGURE NIC" and verify the resource settings listed above
under the heading "Device Configuration."
6 If changes are required, save those changes and exit.
7 Remove the 3Com software driver diskette and reboot the machine.
8 After Windows loads, log onto the machine with administrator privileges.
(If you do not have the required information, contact your network
administrator.)
9 Open the "Main" Program Group, double-click on the "Control Panel"
icon.
10 Select the "Network" icon in the "Control Panel" program group.
11 Click on "YES" in the "Network Settings" dialog box, and NT Networking
will be installed on your computer.
12 Insert the Windows NT Workstation CD.
13 In "Windows NT Setup", set the path to your NT files and click on the
"Continue" button. (If you have an HP preloaded HDD, set path to
"C:\I386")
14 Click on the "Do Not Detect" button from the " Network Adapter Card
Detection" dialog box, and click on "Continue" in the second "Network
Adapter Card Detection" dialog box.
15 From the "Drop Down List", scroll down and select "<Other> Requires
disk from manufacturer", then click on "Continue".
16 Set the path to "A:\" in the "Insert Disk" dialog box, and then insert the
3COM 3C905 drivers disk 1. (If you have an HP preloaded HDD, set path
to "C:\Masters\LanDrv\3C905\disk1\)
17 Click "OK" at the "Install Driver" dialog box.
18 Select "3Com Fast Etherlink XL Adapter (3C905)" in the "Select OEM
Option" dialog box, and click "OK."
19 When prompted, insert "3Com Etherdisk for Fast Etherlink XL disk 2" and
click "OK."