HP Vectra VL6 7 Installation Manual page 3

Fast etherlink xl tx pci network interface card (10/100bt)

Hide thumbs Also See for Vectra VL6 7:

c905.bk : ch_1.fb4 Page 1 Thursday, October 22, 1998 9:51 AM

Windows for

Workgroups

Connecting to a Netware 3.12 server

Requirements

• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.

• 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1.

• Vectra VL8 Driver Name: 3C90X.LAN Size: 33KB Date: 2/5/98

• Vectra VL7 Driver Name: EL90XIDS.INF Size: 2K Date: 2/23/96

• DOS and MS-Windows for Workgroups 3.11 media.

• Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and

• NWLink NetBIOS transfer protocols.

• 32-bit Netware client for DOS and MS-Windows.

Device Configuration

• Network Driver Optimization Normal

• Full DuplexAuto Select (N-Way)

• Boot PROM Disabled

• Media Type Auto Select (N-Way)

Vectra VL8

I/O Base Address

FCC0h (PCI)

Interrupt Request

9 (PCI)

Procedure

1 With the HP Vectra turned off, install the 3COM Fast Etherlink 3C905

Connecting to a Netware 3.12 server

Vectra VL7

FC40h (PCI)

9 (PCI)

Windows for Workgroups

3c905-tx