Table of Contents
Advertisement
■mDP connector Installation / Removal
When connecting the conversion cable to the N8105-61 mDP, align the latch and lock holes on the
connector. You will hear a click when it is inserted all the way.
NOTE: Insert the connector as far as it will go into a gap and secure it with a connector latch or screw.
Conversion cable
K410-470( 0A)
Connector latch
MiniDisplayPort Connector
(mDP Connector)
When removing it, hold the connector latch and release the lock, and pull out the connector.
■DP Installation / Removal
Connect the display cable of the display to be used to the DP connector. The display cable side is
equipped with a fixing mechanism such as a hand screw or latch, so fix it firmly. When removing,
release the fixing before removing.
etc.
N8105-61
Lock hole
E-7
Advertisement
Table of Contents
