6
Reboot the OS after the installer finishes.
IMPORTANT
7
This completes the installation of the display driver.
After installing the display driver, set the screen resolution, screen color, refresh rate, etc. referring to
"4.Configuration" (page E-11).
After installing the driver for this product, it is necessary to change the BIOS settings
of the server.
When rebooting the system after installing the driver, please make the following
settings on the BIOS setting screen. (Pressing <F2> on the POST screen during startup
will take you to the BIOS configuration screen.)
BIOS Menu → Advanced → PCI Configuration
VGA Controller [Disabled].
(The factory default setting of the server may be [Enabled].
Click the [CLOSE] button to exit the installer.
E-9