Mitsubishi Electric AE630-SW Instruction Manual page 14

●(C) REMOTE/LOCAL switch
The REMOTE/LOCAL switch is used for change over of remote/local control of AE-SW.
When this switch is in REMOTE position, the remote control (ACB ON/OFF and charging the spring) are available via
Modbus network.
When this switch is in LOCAL position, the remote control can not be operated.
●(D) Connector for AE-SW Drawout position switch (BIF-CL) connection
This connector is used for connection to BIF-CL (*Option).
For details about BIF-CL, see
Wiring connection is shown as below.
"Instruction Manual for AE-SW Drawout position switch"
BIF-CL cable
(*Attached to BIF-CL)
Fig 3.12: Wiring Connection
E-14
Keep distance more than
100mm from the power
distribution circuit.
Hot plugging is not
permitted
.