3. Part Names and Settings
3.1 BIF-MD
The unit overview is shown as below.
A
B
C
Fig 3.1: Front view
●(A) LEDs
Name
Indication
ON
POWER
OFF
Flashing
T ERR.
OFF
Flashing
RXD
OFF
Flashing
TXD
OFF
Flashing
Modbus ERR.
ON
OFF
●(B) RESET Switch
RESET Switch is used to reset the BIF-MD without power off.
After changing the switch while power supply is on, push this switch.
D
E
Description
Power is supplied.
Power is not supplied.
Internal transmission fault
Normal operating state
Frame reception.
No reception.
Frame sending.
No sending.
Transmission fault
Setting switch fault
No fault
E-8
F
Fig 3.2: Side view
Check
Connection of internal transmission cable.
Power supply of Power supply module (P1-P5).
Setting of Stop bit, Parity, Baud Rate.
Connection of internal transmission cable.
Connection of Modbus cable. Terminator.
Programming (Function code, address, setting data.)
Setting of Stop bit, Parity, Baud Rate, Bus address.
G