Huawei AP4030DN
Hardware Installation and Maintenance Guide
3.
3.3 Logging In to the AP Using a Web Client
Pre-configuration Tasks
Before configuring users to log in to the AP using HTTP, complete the following task:
Configure reachable routes between the terminal and the AP.
Issue 02 (2015-05-18)
Figure 3-1 PuTTY Configuration page
Click Open. Enter the user name and password at the prompt, and press Enter. You
have logged in to the device. (The following information is only for reference.)
login as: admin
Sent username "admin"
admin@169.254.1.1's password:
<Huawei>
It is recommended that you change the initial user name and password after login.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Logging In to the AP
19