Page 1
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN Hardware Installation and Maintenance Guide Issue Date 2015-05-18 HUAWEI TECHNOLOGIES CO., LTD.
Page 2
All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
Device ground screw Connects a ground cable to the AP. 1.2 Indicator Description Indoor AP series products provide a single indicator or multiple indicators. The AP3010DN-AGN, AP5010DN-AGN, AP5010SN-GN, AP5030DN, AP5130DN, AP6010DN-AGN, and AP6010SN-GN provide only a single indicator. The AP6310SN-GN, AP7110DN-AGN, and AP7110SN-GN provide multiple indicators: SYS indicator, Link indicator, and Wireless indicator.
The AP6310SN-GN does not support WDS/mesh functions; therefore, the Wireless indicator of the AP6310SN-GN does not indicate the signal strength. 1.3 Basic Specifications Table 1-7 Basic specifications of the AP3010DN-AGN, AP5010SN-GN, AP5010DN-AGN, AP6010DN-AGN, and AP6010SN-GN Item Description...
Operating humidity 5% to 95% (non-condensing) IP grade IP41 Atmospheric 70 kPa to 106 kPa pressure 1.4 Ordering Information To place an order, contact the Huawei local office. Part Description Number 2355829 Assembling Components,AP3010DN-AGN-CN,AP3010DN-AGN Mainframe(11n,General AP Indoor,2x2 Double Frequency,Built-in Antenna,AC/DC adapter(CN))
Page 23
Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN Hardware Installation and Maintenance Guide 2 AP Installation Figure 2-1 Installation flowchart of the AP3010DN-AGN, AP5010DN-AGN, AP5010SN-GN, AP6010DN-AGN, AP6010SN-GN, AP6310SN-GN, AP7110SN-GN and AP7110DN-AGN Start Check before installation To a T-rail Against the ceiling Determine the installation location Against the wall...
Page 39
Before the device is delivered, the STelnet service has been configured on the device. The STelnet interface number is 22, and the default user name and password are respectively admin and admin@huawei.com. Use the SSH client software to log in to the device through STelnet from a terminal. The third-party software PuTTY is used as an example here.
Enter the default user name admin. The initial password is admin in V200R002C00 and earlire versions and is admin@huawei.com in V200R003C00 and later versions. If the user view is displayed, you have logged in successfully. You are advised to change the user name and password on your first login.
169.254.1.1 and the mask is 255.255.0.0. The web management system provides a default user account, with the user name admin and password admin@huawei.com. You are advised to change the user name and password on your first login. Assign your PC an IP address on the same network segment as the default IP address of the web management system, and connect the PC to the GE interface.
4. If the device still cannot be powered on, the device itself is faulty. Contact Huawei technical support or Huawei agent and ask them to replace the device. PoE power supply 1.
Page 44
1.25 Gbit/s. It is recommended that you use an optical module with the same speed as the optical interface to ensure efficient optical transmission. If the interface remains Down, contact Huawei technical support. Issue 11 (2015-05-18) Huawei Proprietary and Confidential...
Precautions for Assembly Use dedicated tools or tools delivered by Huawei and follow the methods given here during assembly. Hold terminals of cables instead of pulling the cables when installing or removing cable components.
Page 47
When you strip a power cable, do not damage the conductor of the cable. l If the bare crimping terminal is not provided by Huawei, the value of L1 is 1 mm (0.04 in.) to 2 mm (0.08 in.) greater than the value of L.
Page 50
NOTICE l When you strip a power cable, do not damage the conductor of the cable. l If the bare crimping terminal is not provided by Huawei, you can adjust the value of L as required. Figure 5-7 Stripping a power cable (JG terminal)
Page 66
Testing the Connection of Assembled Cables Context Huawei provides two types of Ethernet cables: straight-through cables and crossover cables. Straight-through cables are connected in a one-to-one manner. They are used to connect terminals such as a computer or switch to network devices.
For example, in this document, the adapters of cable connectors have separate interfaces. In the actual situation, the adapters may have interfaces fixed on equipment. Use dedicated tools provided or specified by Huawei and follow the installation procedure described here.