Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual page 12

Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
Type
Alarm
Fault
Link indicator
Table 1-4 Descriptions about the Link indicator
Type
LINK
ACT
Wireless indicator
Table 1-5 Traffic volume indicator
Color
Yellow/green
Yellow/green
Issue 11 (2015-05-18)
Color Status
Green Blinking
once every
0.25s (4
Hz)
Red Steady on
Color Status
Green Steady on
Green Blinking
Status
Off
Steady on
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
l The software is being upgraded.
l After the software is uploaded and started, the AP
working in Fit AP mode requests to go online on
the AC and maintains this state until it goes
online successfully on the AC (before the
CAPWAP link is established).
l The AP working in Fit AP mode fails to go online
on the AC (the CAPWAP link disconnects).
A fault that affects services has occurred, such as a
DRAM detection failure or system software loading
failure. The fault cannot be automatically rectified
and must be rectified manually.
Description
The system is running properly, the Ethernet
connection is normal, and no data is being
transmitted.
The system is running properly, the Ethernet
connection is normal, and the AP is transmitting
data. The indicator blinks more quickly when more
data is being transmitted.
Description
Radios are disabled, and no STA is connected
to the AP.
The AP has STAs connected to the 2.4 GHz
radio or 5 GHz radio, but no data is being
transmitted.
1 Indoor AP Overview
5