Indicator Description - Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual

Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
No.
9
10
11

1.2 Indicator Description

Indoor AP series products provide a single indicator or multiple indicators.
l
l
The following table describes indicators on indoor APs.
Single indicator and SYS indicator
Table 1-3 Descriptions about the single indicator and SYS indicator
Type
Default
status after
power-on
Software
startup
status
Running
status
Issue 11 (2015-05-18)
Name
5 GHz antenna port
Dual-band antenna
port
Device ground screw Connects a ground cable to the AP.
The AP3010DN-AGN, AP5010DN-AGN, AP5010SN-GN, AP5030DN, AP5130DN,
AP6010DN-AGN, and AP6010SN-GN provide only a single indicator.
The AP6310SN-GN, AP7110DN-AGN, and AP7110SN-GN provide multiple indicators:
SYS indicator, Link indicator, and Wireless indicator.
NOTE
l Indicator colors may vary slightly at different temperature.
l After a Fit AP is powered on, you can run the led off command on the AC to turn off all AP indicators.
To restore the indicators to normal working status, run the led on command. Indicators on a Fat AP
cannot be turned off using the led off command.
Color
Green
Green
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Connects a 5 GHz antenna to the AP.
Connects a dual-band antenna to the AP.
Status Description
Steady on The AP is just powered on and the software is not
started yet.
Steady on After the system is reset and starts uploading the
after software, the indicator blinks green once. Until the
blinking software is uploaded and started, the indicator
once remains steady green.
Blinking l The system is running properly, the Ethernet
once every connection is normal, and STAs are associated
2s (0.5 Hz) with the AP.
l The system enters the Uboot CLI.
Blinking The system is running properly, the Ethernet
once every connection is normal, and no STA is associated with
5s (0.2 Hz) the AP. The system is in low power consumption
state.
1 Indoor AP Overview
4