T-Rail Mounting - Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual

Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
3.

2.5.3 T-rail Mounting

1.
Issue 11 (2015-05-18)
UP UP
35mm
1. Ceiling tile
NOTICE
The screws provided for ceiling-mounting of APs are 30 mm long and can be used to fix
an AP on a ceiling not thicker than 15 mm. To install APs on thicker ceilings, you need to
purchase longer screws.
Hang the AP on the mounting screws by aligning the mounting holes at the rear of the AP
with the mounting screws on the bracket and push the AP horizontally to secure the AP.
1
2
NOTE
l Ensure that the AP is correctly installed on the mounting bracket and there must be 200 mm space
above and around the AP for maintenance.
l The AP5030DN and AP5130DN use a different type of sheet metal mounting bracket than other APs.
When installing an AP5030DN or AP5130DN, align the mounting screws at the rear of the AP with
the mounting holes on the sheet metal mounting bracket and then press the AP downwards to secure
the AP on the bracket.
Fix a locking clip at the rear of the AP with two M3x6 screws. For installation methods,
see step 1 in Ceiling Mounting.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2. Adjustable buckle
2 AP Installation
1 2
3
3. M4x30 screw
23