Installing The Device On A T-Rail - Huawei AP4050DN Hardware Installation And Maintenance Manual

AP4050DN-HD
Hardware Installation and Maintenance Guide

2.5.3 Installing the device on a T-rail

The AP can be installed on a T-rail indoors using a fixed mounting bracket.
1.
2.
3.
Issue 01 (2016-04-15)
Ensure that the AP is securely installed on the mounting bracket and there must be 200 mm space

above and around the AP for maintenance.
The angle-adjustable mounting bracket can adjust the AP's angle within ±60° at the vertical and

horizontal directions.
Remove two ceiling tiles around the T-rail, use screws to fix the adjustable buckle to the
mounting bracket, hook the adjustable buckle to the T-rail, and secure the screw on the
adjustable buckle to fasten the mounting bracket and T-rail.
Connect the cables. For details, see 2.6 Cable Connection.
Hang the AP on the mounting holes by aligning the mounting screws at the rear of the
AP with the mounting holes on the bracket and push the AP horizontally to secure the
AP.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
17