Installing The Device On A Pole - Huawei AP4050DN Hardware Installation And Maintenance Manual

AP4050DN-HD
Hardware Installation and Maintenance Guide



2.5.4 Installing the Device on a Pole



1. Determine the AP installation position and attach a base bracket on the pole using the
hose clamp.
a.
b.
c.
d.
Issue 01 (2016-04-15)
Before fixing the adjustable buckle with a screw, you need to adjust the buckle to a proper position
based on the T-rail width.
Ensure that the AP is correctly installed on the mounting bracket and there must be 200 mm space
above and around the AP for maintenance.
The pole must have a diameter of 48 mm to 114 mm and a thickness of at least 2.5 mm.
The AP can be installed on a pole using an angle-adjustable mounting bracket, with it angle
adjustable within ±60° at the vertical and horizontal directions.
Use an M6 inner hex torque screwdriver to loosen the screw on the hose clamp to
open it.
Lead the hose clamp through the mounting bracket and secure the mounting bracket
to the pole.
Tighten and close the hose clamp.
Use an M6 inner hex torque screwdriver to tighten the screw.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
18