Huawei AP4050DN Hardware Installation And Maintenance Manual page 47

AP4050DN-HD
Hardware Installation and Maintenance Guide
Figure 5-19 Removing the shield layer of a twisted-pair cable (unit: mm (in.))
Step 5 Lead the four pairs of twisted-pair wires through the wire holder, as shown in Figure 5-20 and
Figure 5-21. Ensure that the colored wires are in the correct location in the cable.
Figure 5-20 Leading wires through the wire holder
Figure 5-21 Cable locations in a wire holder
White-Green
Step 6 Align the four pairs of cables in the holder, as shown in Figure 5-22. The connections
between the wires and the pins are shown in Figure 5-23 and listed in Table 5-5.
Issue 01 (2016-04-15)
C
G
Green
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
White-Orange
Orange
Blue
White-Blue
White-Brown
Brown
5 Appendix
41