AP4050DN-HD
Hardware Installation and Maintenance Guide
Angle-Adjustable Mounting Bracket
1.
2.
Issue 01 (2016-04-15)
Place a base bracket against the wall and mark the drilling positions through holes of the
bracket, as shown in the following figure.
Use an 8 mm drill bit to drill 35 mm to 40 mm deep holes in the drilling positions.
Hammer the expansion tubes into the holes until the expansion tubes are completely
embedded into the wall.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
12