Cable Connection - Huawei AP4050DN Hardware Installation And Maintenance Manual

AP4050DN-HD
Hardware Installation and Maintenance Guide
5.

2.6 Cable Connection

Figure 2-3 describes the cable connections.
Figure 2-3 Appearance of the AP4050DN-HD
Table 2-3 Cable connections
No.
1
Issue 01 (2016-04-15)
Loosen the two screws at the horizontal direction, adjust the AP's angle at the horizontal
and vertical directions, and tighten the hex socket screws. Use M4x35 cruciform slot
screws to tighten the AP and mounting bracket from the side.
Cable or Device
Network cable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
CAT5E cables or higher must be used.

The service network cable cannot be connected to the

console port; otherwise, the AP may be damaged
when using PoE power supply. The network cable
2 AP Installation
20