Assembling Ethernet Cables - Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual

Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
Cross-Sectional Area of Tubular
Terminal (mm
6 (0.009)
10 (0.015)
16 (0.025)
25 (0.039)
35 (0.054)
----End

5.1.3 Assembling Ethernet Cables

Assembling the Shielded RJ45 Connector and Ethernet Cable
Context
Figure 5-15
Figure 5-15 Shielded RJ45 connector and cable
A. Jacket of connector
E. Jacket of Ethernet cable F. Shield layer of Ethernet cable G. Twisted-pair wires
Procedure
Step 1 Fit the jacket of the connector onto the Ethernet cable, as shown in
Issue 11 (2015-05-18)
2 2
(in. ))
shows the components of an RJ45 connector and a shielded Ethernet cable.
B. Metal shell of connector
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Maximum Width of Crimped Terminal
W1 (mm(in.))
4 (0.16)
5.3 (0.21)
6 (0.24)
8.7 (0.34)
10 (0.39)
C. Wire holder of connector D. Plug of connector
Figure
5 Appendix
-
5-16.
48