Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual page 35

Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
No.
6
l Different power adapters are delivered with indoor AP products according to standards in the countries or
l The AP products sold in the U.S have a fixed country code US, and the country code change function is
l When PoE and power adapter power supplies are available, the devices are preferentially powered by the
Pay attention to the following points when installing antennas
l
l
l
l
l
Pay attention to the following points when installing network cables
l
l
l
Issue 11 (2015-05-18)
Cable
DC power adapter
NOTE
regions where the AP products are delivered. These countries and regions are identified by the barcode on
an AP's nameplate, including: EU (Europe), UK (United Kingdom), CN (China), AU (Australia), US (United
States), and USA (the AP is sold only in the U.S).
disabled.
power adapter.
Antennas of the AP6310SN-GN, AP7110DN-AGN, AP7110SN-GN, and AP5130DN
must comply with local laws and regulations.
Antennas need to be installed by qualified personnel. An AP can only use the antennas
delivered with it.
You need to connect external antennas to the AP7110 series and AP5130DN. Exercise
caution when bending the antennas. Misoperation may hurt your hands.
When replacing WA633SNs with AP6310SN-GNs, you need to convert SMA connectors
to Type N connectors (see Figure a and Figure b). You can also make new feeder lines
matching the connectors of the AP6310SN-GNs (see Figure c).
a
When the RF connector of an AP becomes loose, tighten it with a maximum torque of 13
N•m.
Before connecting an Ethernet cable to the AP, use the cable test tool to check whether the
cable is qualified. If the cable is unqualified, replace it.
Do not connect the service network cable to the console port. Otherwise, the AP may be
damaged when the PoE power supply is used.
Use standard RJ45 connectors on network cables for the AP5010 series.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
l The AP supports the PoE power supply
and DC power supply.
l To connect the AP to a DC power source,
use the power adapter delivered with the
AP; otherwise, the AP maybe damaged.
b
2 AP Installation
c
28