Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual page 120

Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
3.
4.
Issue 11 (2015-05-18)
Figure 5-97 Installing a protective cap
If no protective cap is available, use fibers to protect the optical module, as shown in
5-98.
Figure 5-98 Using fibers to protect an optical module
Cover unused optical connectors with protective caps, as shown in
lay out fibers on the fiber rack or coil them in a fiber management tray to prevent fibers
from being squeezed.
Figure 5-99 Installing a protective cap on a fiber
If a receptacle or an optical connector has not been used for a long time and is not covered
with a protective cap, you need to clean it before using it. Clean a receptacle with a cotton
swab, as shown in Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-100. Clean an optical connector with cleaning tissues.
5 Appendix
Figure
Figure 5-99, and then
113