GR4000 Installation Guide Version 1.00 - Preliminary
(4) Connection of 10BASE-T/100BASE-TX/1000BASE-T interface cable
(RJ45 connector)
Insert the connector into the Ethernet port until it is locked.
RJ45 connector
Figure 4.10-4 Connection of 10BASE-T/100BASE-TX/1000BASE-T interface cable
(RJ45 connector).
*
4.11
Powering the GR4000 Models ON/OFF
4.11.1 Case of GR4000-80E1
(1) Powering on the GR4000-80E1
Set all the switches of GR4000-80E1 to ON.
Power supply unit 1 (POW1)
Power supply unit 0 (POW0)
Figure 4.11-1 GR4000-80E1 powered on
138
Ethernet port
NOTE: When removing the connector, do it holding down its tabs.
(OFF)
Power switch
Set to ON
520-10-014-20X