Hitachi GR4000 Series Installation Manual page 189

GR4000 Installation Guide Version 1.00 - Preliminary
Step 2 Insert the power supply unit into the slot deeply until it reaches the end of
the slot, and
fasten the screws of the power supply unit.
Screws
Screws
Figure 5.4-18 Power supply unit fixed into its position
Caution: Use a driver when screwing up a power supply unit, and make sure that it is
!
fixed into its position firmly.
Step 3 Attach the power cable to the power supply.
（See the section 4.5.3, which gives you the instruction related to the
attachment/detachment of the GR4000-320E (AC) power cable.）
171
520-10-014-20X