Advertisement
R250D
Hardware Installation and Maintenance Guide
2.
3.
4.
5.
Issue 01 (2016-09-30)
Connect the network cable to the GE0/PoE_IN interface.
Connect the cables. For details, see
Open the front cover of the device, align screws on both sides with the screw holes in the
86-type box, and use the Phillips screwdriver to tighten the two screws.
Close the cover. If torx security screws are used to prevent theft, use a T9 torx security
screwdriver to tighten the torx security screws into the device.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2.6 Cable
Connection.
M4
1N•m
2 AP Installation
13
Advertisement
