Advertisement
R250D
Hardware Installation and Maintenance Guide
2.
3.
4.
Issue 01 (2016-09-30)
Use a 6 mm drill bit to drill 25 mm to 30 mm deep holes in the drilling positions.
Hammer the expansion tubes into the holes until the expansion tubes are completely
embedded into the wall.
25mm~30mm
Connect the cables. For details, see
Open the front cover of the device, align screws on both sides with the plastic expansion
tubes, and use the Phillips screwdriver to tighten the two screws.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Ø6
2.6 Cable
Connection.
2 AP Installation
11
Advertisement
