Advertisement
R250D
Hardware Installation and Maintenance Guide
5.
2.5.2 Installing the Device into an 86-Type Box
Installing the device in an 86-type box requires expansion screws delivered with the device.
The procedure is as follows:
1.
Issue 01 (2016-09-30)
Close the cover. If torx security screws are used to prevent theft, use a T9 torx security
screwdriver to tighten the torx security screws into the device.
NOTE
You need to separately prepare the T9 torx security screwdriver.
Use a screwdriver to remove the 86-type panel from the wall (skip this step if no 86-type
panel is installed on the wall).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 AP Installation
ST3.5
0.3N•m
ST2.5
0.16N•m
12
Advertisement
