Advertisement
R250D
Hardware Installation and Maintenance Guide
Table 5-6 Connections between wires and pins (using a straight-through cable as an example)
Matching Pins of Wires
1
2
3
4
5
6
7
8
Step 3 Feed the cable into the plug, and crimp the connector, as shown in
Figure 5-31 Crimping the connector
Step 4 To complete the assembly of the other end, repeat
----End
Checking the Appearance of Contact Strips
Context
l
l
Issue 01 (2016-09-30)
NOTE
When inserting the cable, check from the side or bore of the plug to ensure that the cable is completely
seated in the plug.
To ensure proper contact between the crimped wires and the wire conductors, the heights
and sizes of the contact strips must be standard and the same.
The contact strips must be parallel to each other, with an offset of less than ± 5°. The top
margin of a strip must be parallel to the axis of the connector, with an offset of less than
± 10°.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Wire Color
White-Orange
Orange
White-Green
Blue
White-Blue
Green
White-Brown
Brown
Figure
Step 1
through
Step
3.
5 Appendix
5-31.
39
Advertisement
