Siemens SIMATIC S7-1500 System Manual page 129

Commissioning
9.6 Identification and maintenance data
Identification data
IM_SWRevision_Internal_
•
Change
IM_REVISION_COUNTER
IM_PROFILE_ID
IM_PROFILE_SPECIFIC_TYPE
IM_VERSION
IM_Version_Major
•
IM_Version_Minor
•
IM_SUPPORTED
Maintenance data 1: (Record index AFF1
IM_TAG_FUNCTION
IM_TAG_LOCATION
Maintenance data 2: (Record index AFF2
IM_DATE
Maintenance data 3: (Record index AFF3
IM_DESCRIPTOR
Reading I&M records with record 255 (distributed configuration via PROFIBUS)
The modules also support standardized access to the identification data via record 255
(index 65000 through 65003). For further information on the DS 255 data structure, refer to
the specifications of the PROFIBUS Guideline - Order No. 3.502.
128
Access
(1 byte) 0000
H
read (2 bytes) 0000
H
read (2 bytes) 0000
H
read (2 bytes) 0001
H
0003
H
read 0101
H
(1 byte)
(1 byte)
read (2 bytes) 000E
H
)
H
read/write -
(32 bytes)
read/write -
(22 bytes)
)
H
read/write YYYY-MM-DD HH:MM
(16 bytes)
)
H
read/write -
(54 bytes)
Example
- 00FF
H
Provides information about parameter
changes on the module
(not used)
Generic Device
CPU
I/O modules
Provides information on the ID data
version
(0101
provides information about the available
identification and maintenance data
(I&M1 to I&M3)
Enter an identifier for the module here,
that is unique plant-wide.
Enter the installation location of the
module here.
Enter the installation date of the module
here.
Enter a comment about the module here.
System Manual, 02/2014, A5E03461182-AB
Explanation
= Version 1.1)
H
S7-1500 Automation System