Siemens SIMATIC S7-1500 System Manual page 162

Handling the front cover
The front cover is removable and can be taken off or replaced during operation (RUN).
Removing or replacing of the displays does not have any influence on the running CPU.
The front cover is removed from the CPU as follows:
1. Flip up the front cover until the front cover stands at a 90° angle to the front of the
2. In the upper area of the front cover simultaneously press on the anchor(s) and pull the
The figure below shows an exemplary view of the CPU 1516-3 PN/DP.
①
Figure 13-2
S7-1500 Automation System
System Manual, 02/2014, A5E03461182-AB
module.
front cover forward and away.
Note
The removal and insertion of the display is also possible during operation (RUN).
Fasteners for removing and fitting the front panel
Removing and fitting the front panel
Display of the CPU
161