❏ If ink smears on your documents when printing on thick
media, set the adjust lever to the "+" position. To change the
setting, open the printer cover and position the lever as shown
in the illustration.
Note:
❏ Return the adjust lever to the "0" position before printing on
media of normal thickness. Leaving the lever in the "+" position
may cause gaps in the printed image.
❏ When the adjust lever is in the "+" position, make sure the High
Speed setting in the printer driver's Advanced dialog box is off.
To turn this option off, you may also need to change the Print
Quality setting or align the print head using the Print Head
Alignment utility.
Loading Envelopes
When printing on envelopes, please note the following:
❏ You can load up to 10 envelopes into the sheet feeder.
Paper Handling
1-5