4. To load the sheet in the printer, lightly hold the paper in place
while you press the
Once the sheet is loaded, you are ready to print.
Note:
❏ You must hold the paper edge in place with your hand while you
press the
❏ If the paper does not feed correctly, remove the paper completely and
load it again. If you have difficulty removing the paper, depress the
E
load/eject button for three seconds to eject it.
The roll paper sheet is now loaded in your printer. Next, set up
the printer driver and try printing. For details on setting up the
printer driver, refer to "Printing on roll paper" on page 1-17.
Printing on roll paper
Once you have prepared your roll paper and loaded it into the
printer, you must make the printer driver settings before you can
print.
E
load/eject button, as shown below.
E
load/eject button to make sure the paper feeds correctly.
Paper Handling
1-17