Testing The Transmitter - Philips 50 T Series Service Manual

Hide thumbs Also See for 50 T Series:

Table of Contents

Testing the Transmitter

1. Slide back the battery cover.

2. Switch on the transmitter. The green On/Off light (A) comes on

showing the transmitter is on.

3. Check the red light (B) situated behind the middle battery. If:

• the red light is lit for a few seconds and then goes out, the self test is

successfully complete.

• the red light blinks, or remains on after three seconds, change the

batteries. If the fault continues, there is a hardware error. See

troubleshooting flowcharts in Chapter 4.

Chapter 3 - Tests and Error Messages

Table of Contents

M1310a