Fmp; Fmp Test; Figure 9 Troubleshooting: Fmp - Philips 50 T Series Service Manual

FMP

FMP Test

To test an ultrasound transducer:
1. Connect the telemetry receiver to the fetal monitor using the interface cable.
2. Switch on the fetal monitor, its recorder and the telemetry receiver.
3. Connect the transducer to the ultrasound socket.
4. Switch on the transmitter.
5. Increase the loudspeaker volume on the fetal monitor to an audible level.
Chapter 4 - Troubleshooting

Figure 9 Troubleshooting: FMP

FMP