Brother DCP-J1800DW Online User's Manual page 158

Hide thumbs Also See for DCP-J1800DW:
Table of Contents

Advertisement

Home >
Network
>
Wireless Network Settings
Wireless Network Using the PIN Method of Wi-Fi Protected Setup
Configure Your Machine for a Wireless Network Using the PIN Method
of Wi-Fi Protected Setup
If your wireless LAN access point/router supports WPS, you can use the Personal Identification Number (PIN)
Method to configure your wireless network settings.
The PIN Method is one of the connection methods developed by the Wi-Fi Alliance
created by an Enrollee (your machine) to the Registrar (a device that manages the wireless LAN), you can set up
the wireless network and security settings. For more information on how to access WPS mode, see the
instructions provided with your wireless access point/router.
Type A
Connection when the wireless LAN access point/router (1) doubles as the Registrar.
1
Type B
Connection when another device (2), such as a computer, is used as the Registrar.
1. Press
[Settings] > [Network] > [WLAN(Wi-Fi)] > [WPS/PIN Code].
2. When [Enable WLAN?] appears, press [Yes].
The wireless setup wizard starts. To cancel, press [No].
3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router.
4. Using a computer connected to the network, in your browser's address bar, type the IP address of the device
you are using as the Registrar. (For example: http://192.168.1.2)
5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.
The Registrar is usually the wireless LAN access point/router.
The settings page may differ depending on the brand of wireless LAN access point/router. For more
information, see the instructions supplied with your wireless LAN access point/router.
If you are using a Windows 7, Windows 8.1, or Windows 10 computer as a Registrar, complete the
following steps:
6. Do one of the following:
Windows 10
Click
> Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
Windows 8.1
(WPS)
1
2
>
Use the Wireless Network
(WPS)
> Configure Your Machine for a
®
. By submitting a PIN
153

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcp-j1700dw

Table of Contents