Table of Contents
Advertisement
Home >
Routine Maintenance
Clean the Paper Feed Rollers
If the paper feed rollers are stained with ink or have a buildup of paper dust, it may cause paper feed problems.
1. Unplug the machine from the electrical socket.
2. If the paper support flap is open, close it, and then close the paper support.
3. Pull the paper tray (1) completely out of the machine.
4. Clean the front side of the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water, using a
side-to-side motion. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
5. Lift the flap (2), and then clean the back side of the Paper Feed Rollers (1) with a soft lint-free cloth
moistened with water. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
CAUTION
The cutter installed in the machine has sharp edges, which may cause an injury. Keep your hands away
from the cutter located behind the Paper Feed Rollers.
6. Slowly push the paper tray completely into the machine.
7. Reconnect the power cord.
Do not use the machine again until the rollers are dry. Using the machine before the rollers are dry may
cause paper feed problems.
Related Information
•
Clean Your Brother Machine
Related Topics:
•
Paper Handling and Printing Problems
>
Clean Your Brother Machine
1
2
> Clean the Paper Feed Rollers
1
1
291
Advertisement
Table of Contents
