Brother DCP-J1800DW Online User's Manual page 339

Level 3
Wi-Fi Direct
Message from
Brother
Web Connect
Settings
Network I/F
(DCP-J1800DW)
Network Reset
[Print Reports]
[All Settings] > [Print Reports]
Level 3
User Settings
Network Configuration Print a list of your Network settings.
WLAN Report
Level 4 Level 5
Manual -
Group Owner -
Push Button -
PIN Code -
Device Device Name
Information
SSID
IP Address
Status Status
Information
Signal
I/F Enable -
Message from -
Brother
Status -
Proxy Settings Proxy
Connection
Address
Port
User Name
Password
- -
- -
Descriptions
Print a list of your settings.
Print the wireless LAN connection results.
Level 6 Descriptions
- Configure your Wi-Fi Direct network
settings manually.
- Set your machine as the Group
Owner.
- Configure your Wi-Fi Direct network
settings using the one-button push
method.
- Configure your Wi-Fi Direct network
settings using WPS with a PIN
code.
- View your machine's device name.
- View the Group Owner's SSID.
When the machine is not
connected, the LCD displays Not
Connected.
- View your machine's current IP
Address.
- View the current Wi-Fi Direct
network status.
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
- Turn the Wi-Fi Direct connection on
or off.
- Display messages and notifications
from Brother.
-
- Change the Web connection
settings.
-
-
-
-
- Select the network connection type.
- Restore all network settings back to
the factory settings.
334