Asus ISDNLINK TA-200 Manual page 17

For the other fields such as Server Type, please input the values provided by your
2.
ISP. Ensure that you enter a valid ISDN connection telephone number for your ISP,
remember that many ISP use a different number for normal modem and ISDN
access.
These setup procedures should give you connection speeds of 64Kbps.
128K/MLP Access for Windows 95
On the New Connection select the "ISDN TA (MultiLink PPP, 128K) Modem" or
1.
"ISDN TA (MultiLink PPP with BOD, 128K) Modem" .
For the other fields such as Server Type, please input the values provided by your
2.
ISP. Ensure that you enter a valid ISDN connection telephone number for your ISP,
remember that many ISP use the different number for normal modem and ISDN
access.
These setup procedures should give you connection speeds of 128Kbps. Before make
the 128K connection, please confirm that your ISP supports 128K or not. Some ISP
don' t or may levy an extra charge for this service.
Accessing the Outside World Using Dial-Up Networking
Now you have crated a dial-up connection you are now ready to make a connection with
your ISP server. Open Dial-Up Networking icon, and then select the name configured
above in the folder and click "Dial". The system should then dial and connect to your
ISP at either 64K or 128K depending on how you setup the call. The server will verify
your login name, password, and register you on the server.
If you double-click the small icon of Dial-Up Networking at the right-bottom of the
Windows, the Dial-Up Networking Monitor shows your connection status including
connection speed, server type, etc. You are now ready to use the Internet tools to
access the Internet or network tool to access remote network.
If you find problems after connecting such as the line is dropped or you cannot access
the Internet, or you cannot access your remote network, please go back to check your
network settings with your ISP or network administrator.
Install the CAPI20 device drive
With the CAPI2 interface you can use any CAPI application such as RVS-COM, ZOC to
access TA-200 as if it were an internal ISDN card. You can therefore use the Soft-
G3Fax, Telephony, File Transfer ... functions supplied by the RVS-COM package.
Before you install the CAPI20 device driver, the TA-200 should be correctly installed and
configured by Windows 95 as described above. Please refer Appendix B for further
information.
© COPYRIGHT OF ASUSCOM NETWORK INC.
17