Asus ISDNLINK TA-200 Manual page 35

Reboot to enable the CAPI20 device driver. After you restart your windows system,
3.
you will see the CAPI driver in ControlPanel
à
ISDNLink ISDNLink TA-200 CAPI device driver.
Configure the TA-200.
4.
Manager, as above item 3), you can set the TA-200 system parameters including
switch type, SPID, Standby Time, CODEC, Voice Call Type, MSN and SAD
(subaddress) for POTS ports. The MSN and SAD are used to identify who makes
this call so your telephony service provider can charge you based on this number.
If you also check the "ENABLE", it means the analog devices connected to POTS
ports will not receive any incoming call (no ring tone) if the called party number
In the properties of the CAPI driver (found in Device
© COPYRIGHT OF ASUSCOM NETWORK INC.
à à
System DeviceManager
à
35