Asus ISDNLINK TA-200 Manual page 23

128K/MLP Access for Windows NT 4.0
First of all check that your ISP does provide 128K connection to the internet.
1.
Then select Start
2.
the name of the new Dial-Up account and click "Next >". Enter the server type
details for your ISP. Click "Next >". Enter the phone number of the ISP and click
"Next". Click "Finish".
To configure server settings or dialing properties, click on the "More" button and
3.
select the item you want to change from the pull down list. And then Click "Dial" to
make a connection with the server over ISDN. To compare with Windows95 Dial-
up Networking, these parameters (phone number, dial using port, server type, and
security) are located in the item "Edit entry and modem properties.." when you click
on the "More" button.
128K) Modem" or "ISDN TA (MultiLink PPP with BOD, 128K) Modem" for Internet
Access. In the "Security" sub-window, check that you have enabled "Accept any
authentication including clear text".
be configured in RAS with "dial out" capability, otherwise you can not use it.
Accessing the Outside World Using Dial-Up Networking
You are now ready to make a connection with your ISP server. Click the Dial-Up
Networking icon, and select the name configured above in the phone book entry and
then click "Dial". The system should then dial and connect to your ISP at either 128k or
64k depending on how you setup the call.
password, and register you on the server.
If you double-click the small icon of Dial-Up Networking at the right-bottom of the
Windows, the Dial-Up Networking Monitor shows your connection status including
connection speed, server type, etc. You are now ready to use the Internet tools to
à à
Programs Accessories
In the Dial using field, select the "ISDN TA (MultiLink PPP,
© COPYRIGHT OF ASUSCOM NETWORK INC.
à
Dial-Up Networking and then enter
Please note that this virtual modem must
The server will verify your login name,
23