Unit Dimensions
Figure 4-2 shows the dimensions of the transceiver case and its mounting holes, and Figure 4-3 on
Page 108, the dimensions for mounting with factory-supplied brackets. If possible, choose a mounting loca-
tion that provides easy access to the connectors on the end of the radio and an unobstructed view of the LED
status indicators.
TOP
FRONT
BOTTOM
THREADED
HOLES FOR
MOUNTING
SCREWS (4)
#6-32 X 1/4˝ LONG
SIDE
Not to scale
05-2806A01, Rev. L
6.75˝ (17.15 cm)
4.85˝ (12.32 cm)
4.25˝ (10.8 cm)
4.75˝ (12.0 cm)
Figure 4-2. Transceiver Dimensions
MDS iNET Series Reference Manual
1.4˝ (3.56 cm)
107